Allparts Select “Licensed by Fender ” Quarter Sawn Roasted Maple “VIN-MOD” Replacement Neck for Jazzmaster – Unfinished

Allparts Select 

Allparts “Select” represents the very best Allparts has to offer in terms of quality, features, and exclusivity.  Produced in limited batches using only the finest materials, our Select series replacement necks offer compelling combinations of highly desirable specifications and high-end appointments.     

Model Overview 

Officially licensed by Fender® and made to exacting quality standards in Japan using quartersawn roasted maple, this Select series “Vin-Mod” neck offers Jazzmaster® fans a compelling blend of vintage and modern specs.  With truss rod adjustment at the heel and 2-step vintage tuning key holes, this neck maintains a classic aesthetic.  Combined with a flatter modern 10” fretboard radius and 21 tall/narrow frets, players can expect enhanced comfort, easier string bending and a “best of both worlds” playing experience.  Unfinished, but spray-ready, this beauty is ready for your preferred finish.   

Don’t Let Unfinished Necks Fool You!

Why Quartersawn and Roasted?  

Quartersawn wood blanks offer enhanced stability vs. the flatsawn neck blanks most necks are manufactured from.  Roasting the wood further enhances stability by reducing the moisture content down to around 7%.  The result is a more-resonant neck that’s stronger and less susceptible to changing weather conditions.     

Features and Specifications:

• Series: “VIN-MOD” = Blend of Vintage and Modern Specs.
• Scale Length: 25.5″
• Neck Profile Shape: C
• Frets: 21 tall/narrow (.079″ x .055″)
• Wood: 1-piece quartersawn maple
• Finish: Unfinished
• Fretboard Radius: 10″
• Inlays: Black fretboard and side dots
• Nut Width: 1-5/8″
• Heel Width: 2-3/16″
• Heel Shape: Round
• Tuning Peg Holes: Vintage 2-step hole
•  0.34″ (8.5mm) bushing-hole diameter
•  0.25″ (6.5mm) post-hole diameter
• Truss Rod Adjustment Location: Heel
• • Neck Thickness:
•  0.88″ at first fret
•  0.98″ at twelfth fret

Important Notes

• Wood grain varies from neck to neck.  Your neck may differ slightly from what is pictured.
• All necks have a limited lifetime warranty against defects in materials and workmanship.
• All necks may require fret leveling and polish.  This is normal and not a defect.
• To protect against the effects of moisture, we recommend sealing unfinished necks prior to installation.
• This neck is licensed to Allparts Music Corporation by Fender ® Musical Instruments under a quality control trademark license.  Allparts Music Corporation is not affiliated with Fender ® and no Fender ® warranty applies.